Reference Guide

DIAG0242
Message System board - Interrupt controller, IRQ = arg1 : arg2 not detected.
Arguments arg1 = Decimal, arg2 = IRQ Description
Detailed
Description
Recommended
Response Action
Make sure the BIOS is current and retry the diagnostics.
Category System Health (DIAG = Diagnostic)
Severity Severity 1 (Critical)
No alerts are applicable for this message
DIAG0243
Message USB controller error.
Detailed
Description
Recommended
Response Action
Ensure that USB ports are intact, contain no failed device and that BIOS is current.
After corrective action, rerun the diagnostics.
Category System Health (DIAG = Diagnostic)
Severity Severity 1 (Critical)
No alerts are applicable for this message
DIAG0244
Message USB device failed with return code 0x arg1 .
Arguments arg1 = Hex
Detailed
Description
Recommended
Response Action
Ensure that the USB device is correctly inserted or try another USB port or device.
After corrective action, rerun the diagnostics. If the problem persists, ensure that
BIOS is current.
Category System Health (DIAG = Diagnostic)
Severity Severity 2 (Warning)
No alerts are applicable for this message
426