Reference Guide

CTL86
Message arg1 is operating in Fault Tolerant Mode.
Arguments arg1 = controller name
Detailed
Description
The controller is operating in conjunction with another controller to service the
same set of virtual and physical disks, providing better redundancy.
Recommended
Response Action
No response action is required.
Category Storage (CTL = Storage Contr)
Severity Severity 3 (Informational)
Trap/EventID 4331
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔ ✔* ✔
CTL87
Message arg1 settings do not match the settings of its peer.
Arguments arg1 = controller name
Detailed
Description
One or more settings on the controller identified in the message do not match the
settings of its peer controller. This can cause issues in a fault tolerant setup.
Recommended
Response Action
Make sure that each controller is using the same setting by reconfiguring the
settings of the identified controller.
Category Storage (CTL = Storage Contr)
Severity Severity 2 (Warning)
Trap/EventID 4330
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔
CMC ✔ ✔* ✔ ✔*
398