Reference Guide

Detailed
Description
CMC cannot read the information about the FRU, because of an internal issue with
the CMC and the server. Some information such as model number may not be
reported. The server may not power up if the server planar FRU cannot be read.
Recommended
Response Action
Remove and reinsert the server. The Chassis Management Controller will retry the
read operation of the FRU information. If the issue persists, contact your service
provider.
Category Audit (CMC = Chassis Management Controller)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
CMC8604
Message The FRU on storage sled arg1 is not functioning.
Arguments arg1 = slot number
Detailed
Description
The FRU on the storage sled specified in the message is not functioning or CMC is
unable to read it.
Recommended
Response Action
Do the following: 1) Reinsert the specified storage sled or virtual reseat the sled 2)
Reset CMC and wait for a few minutes for the CMC to finish restarting. If the issue
persists, contact your service provider.
Category System Health (CMC = Chassis Management Controller)
Severity Severity 1 (Critical)
Trap/EventID 2545
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔* ✔* ✔*
CMC ✔ ✔* ✔* ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔*
CMC ✔* ✔*
309