Reference Guide

CMC8545
Message Detected a missing process failover condition detected. Process = arg1 .
Arguments arg1 = process name
Detailed
Description
A firmware error has occurred causing a CMC failover. The process identified in the
message was not detected. The CMC will restart automatically.
Recommended
Response Action
No response action is required. If multiple failovers occur, contact your service
provider.
Category Audit (CMC = Chassis Management Controller)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
CMC8546
Message Issues identified with Process arg1 . Failover condition detected.
Arguments arg1 = process name
Detailed
Description
A firmware error has occurred in the internal firmware process identified in the
message. This condition will cause a CMC failover to occur. If the issue persists,
contact your service provider.
Recommended
Response Action
No response action is required. A failover may result from this condition. If multiple
failovers occur, contact your service provider.
Category Audit (CMC = Chassis Management Controller)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
293