Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
CMC8539
Message The CMC arg1 is unable to log arg2 event to the Hardware Log.
Arguments arg1 = slot id, arg2 = event message
Detailed
Description
CMC cannot log new events to Hardware Log if Hardware Log is full. Therefore,
new events are not written to the log unless older events are cleared. This issue
also occurs if event logging is disabled.
Recommended
Response Action
Do the following: 1) Save the Hardware Log if required. 2) Clear the Hardware Log.
Category Audit (CMC = Chassis Management Controller)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
CMC8540
Message The CMC arg1 is turned on.
Arguments arg1 = slot id
Detailed
Description
The CMC specified in the message is turned on because of a CMC insertion or due
to chassis AC power on.
Recommended
Response Action
No response action is required.
290