Reference Guide

No alerts are applicable for this message
CMC004
Message Unable to complete the operation because the parameter arg1 is invalid.
Arguments arg1 = parameter name
Detailed
Description
The operation cannot be completed because the parameter identified in the
message is invalid.
Recommended
Response Action
Enter a valid parameter and retry the operation. For information about valid
parameters, see the CMC Profile document available on the support site.
Category Configuration (CMC = Chassis Management Controller)
Severity Severity 2 (Warning)
No alerts are applicable for this message
CMC005
Message Unable to complete the operation because of a mismatch between AttributeName
and AttributeValue count.
Detailed
Description
The operation cannot be completed because of a mismatch between
AttributeName and AttributeValue count.
Recommended
Response Action
Enter a valid AttributeName and AttributeValue count, and then retry the operation.
Category Configuration (CMC = Chassis Management Controller)
Severity Severity 2 (Warning)
No alerts are applicable for this message
CMC401
Message Changing the Reserved QuickDeploy IP Addresses setting to arg1 may create an
issue in the future if higher density server nodes are inserted in to the Chassis (for
example, quarter-height servers). Press OK to continue.
Arguments arg1 = number of IP address
Detailed
Description
Changing the Reserved QuickDeploy IP Addresses setting to <number of IP
address> may create an issue in the future if higher density server nodes are
inserted in to the Chassis (for example, quarter-height servers).
Recommended
Response Action
Select a higher number to accomodate future higher density server node additions,
otherwise no response action is required.
Category Configuration (CMC = Chassis Management Controller)
Severity Severity 2 (Warning)
269