Reference Guide

CBL0008
Message One or more cables are missing from arg1 .
Arguments arg1 = controller name
Detailed
Description
One or more cables have been detected as missing from the Fault Tolerant storage
controller identified in the message.
Recommended
Response Action
Make sure all cables are properly connected. For information about cabling, see the
Owners Manual available at the support site.
Category Storage (CBL = Cable)
Severity Severity 2 (Warning)
Trap/EventID 4442
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔ ✔
CMC ✔ ✔
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔ ✔
CMC ✔* ✔ ✔*
CBL8500
Message SAS cable arg1 to expander arg2 is not connected.
Arguments arg1 = cable id, arg2 = expander id
Detailed
Description
SAS cables are not connected to the expander correctly.
Recommended
Response Action
Check whether or not the SAS cables are connected to the expander. Reconnect
the cables and retry the operation.
Category Storage (CBL = Cable)
Severity Severity 1 (Critical)
No alerts are applicable for this message
CBL8501
Message SAS cable arg1 is connected to the incorrect expander.
Arguments arg1 = cable id
266