Reference Guide

Category System Health (CBL = Cable)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
CBL0005
Message Backplane arg1 arg2 connector incorrectly connected to the motherboard SATA
controller.
Arguments arg1 = bay ID, arg2 = connector name
Detailed
Description
The backplane connector identified in the message is incorrectly connected to the
motherboard SATA controller.
Recommended
Response Action
Make sure the cable identified in the message is cabled correctly. If the issue
persists, contact your service provider.
Category System Health (CBL = Cable)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
CBL0006
Message Unsupported backplane arg1 configuration: Multiple RAID controllers cannot be
connected to the same backplane.
Arguments arg1 = bay ID
264