Reference Guide

BOOT014
Message Virtual media not ready.
Detailed
Description
The systems SD card has been removed or is in use.
Recommended
Response Action
Verify that the SD card is inserted and that another operation is not in progress, and
try again.
Category Configuration (BOOT = BOOT Control)
Severity Severity 3 (Informational)
No alerts are applicable for this message
BOOT015
Message Set operation successful for the boot partition.
Detailed
Description
The boot partition configuration request was successful. An unattached vFlash
partition was configured for one-time boot using the
ChangeBootOrderByInstanceID method. The method creates a job (to attach the
vFlash partition and set the partition for one-time boot.
Recommended
Response Action
No response action is required.
Category Configuration (BOOT = BOOT Control)
Severity Severity 3 (Informational)
No alerts are applicable for this message
BOOT016
Message Input source argument value for the boot device is incorrect or not found among
the boot devices on the system.
Detailed
Description
The input source argument value referring to the boot device is incorrect or empty.
The boot device identifier must match the InstanceID for the BootSourceSetting
instance that represents the boot device.
Recommended
Response Action
Use the correct source argument value for the boot device and retry the operation.
Category Configuration (BOOT = BOOT Control)
Severity Severity 2 (Warning)
No alerts are applicable for this message
259