Reference Guide

Category Configuration (BOOT = BOOT Control)
Severity Severity 3 (Informational)
No alerts are applicable for this message
BOOT011
Message Failed to set vFlash partition for one time boot
Detailed
Description
The provided vFlash partition could not be set for one time boot.
Recommended
Response Action
Power cycle system and reapply firmware packages for Lifecycle Controller and
iDRAC.
Category Configuration (BOOT = BOOT Control)
Severity Severity 2 (Warning)
No alerts are applicable for this message
BOOT012
Message Job started to attach and set vFlash SD card partition for OneTime boot.
Detailed
Description
A job was created to configure a OneTime boot to the specified vFlash SD card
partition. If this partition was not attached to the system, the job attaches it as well.
Recommended
Response Action
No response action is required.
Category Configuration (BOOT = BOOT Control)
Severity Severity 3 (Informational)
No alerts are applicable for this message
BOOT013
Message Cannot make changes to non-active boot list.
Detailed
Description
The boot list is currently not active. Changes cannot be made to boot list that is not
active.
Recommended
Response Action
Alter boot mode to set the boot list active and retry the operation.
Category Configuration (BOOT = BOOT Control)
Severity Severity 2 (Warning)
No alerts are applicable for this message
258