Reference Guide

No alerts are applicable for this message
BIOS024
Message The set operation did not complete successfully as the attribute is read-only.
Detailed
Description
The operation cannot run as the attribute value cannot be modified.
Recommended
Response Action
For more information on the attribute, see Lifecycle Controller-Remote Services
documentation.
Category Configuration (BIOS = BIOS Management)
Severity Severity 2 (Warning)
No alerts are applicable for this message
BIOS025
Message Unable set the BIOS password as the BIOS password status is locked.
Detailed
Description
The status of the password is Locked in BIOS and must be set to Unlocked for the
operation to succeed.
Recommended
Response Action
Change BIOS password status in the BIOS setup from Locked to Unlocked and
retry the operation.
Category Configuration (BIOS = BIOS Management)
Severity Severity 2 (Warning)
No alerts are applicable for this message
BIOS026
Message Password status cannot be set to locked when a System Password change is
pending.
Detailed
Description
The status of the Password cannot be set to locked, because currently there is a
System Password change is pending.
Recommended
Response Action
Wait until the pending System Password change is applied or delete the pending
System Password change and retry the operation.
Category Configuration (BIOS = BIOS Management)
Severity Severity 2 (Warning)
No alerts are applicable for this message
250