Reference Guide

Recommended
Response Action
Retry the operation with a BIOS password that conforms with system BIOS
password requirements.
Category Configuration (BIOS = BIOS Management)
Severity Severity 2 (Warning)
No alerts are applicable for this message
BIOS021
Message Cannot authenticate BIOS password.
Detailed
Description
The old BIOS password specified in the change BIOS password operation was
incorrect.
Recommended
Response Action
Retry the operation with correct old BIOS password.
Category Configuration (BIOS = BIOS Management)
Severity Severity 2 (Warning)
No alerts are applicable for this message
BIOS022
Message Cannot set the BIOS password. Password is disabled due to a jumper setting on the
motherboard.
Detailed
Description
The BIOS password is disabled in the hardware using a jumper and can not be set.
See the system owners manual for jumper location.
Recommended
Response Action
Change the jumper setting on the system board to enable changing the BIOS
password.
Category Configuration (BIOS = BIOS Management)
Severity Severity 2 (Warning)
No alerts are applicable for this message
BIOS023
Message Cannot perform the operation due to an unknown error in iDRAC.
Detailed
Description
An unrecoverable error occurred in the operation while communicating with
iDRAC.
Recommended
Response Action
Retry the operation. If the issue continues, reset the iDRAC.
Category Configuration (BIOS = BIOS Management)
Severity Severity 2 (Warning)
249