Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔ ✔ ✔ ✔
CMC
VLT0233
Message The mezzanine card arg1 arg2 voltage is greater than the upper critical threshold.
Arguments arg1 = number, arg2 = name
Detailed
Description
System hardware detected an over voltage or under voltage condition. If multiple
voltage exceptions occur consecutively the system may power down in failsafe
mode.
Recommended
Response Action
1) Review system logs for power supply exceptions. 2) Reseat the mezzanine card.
3) If the problem persists, contact technical support. Refer to the product
documentation to choose a convenient contact method.
Category System Health (VLT = Voltage)
Severity Severity 1 (Critical)
Trap/EventID 2169
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔* ✔ ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔ ✔ ✔ ✔
CMC
VLT0234
Message The mezzanine card arg1 arg2 voltage is outside of range.
Arguments arg1 = number, arg2 = name
Detailed
Description
System hardware detected an over voltage or under voltage condition. If multiple
voltage exceptions occur consecutively the system may power down in failsafe
mode.
Recommended
Response Action
1) Review system logs for power supply exceptions. 2) Reseat the mezzanine card.
3) If the problem persists, contact technical support. Refer to the product
documentation to choose a convenient contact method.
Category System Health (VLT = Voltage)
2268