Reference Guide

VFL0710
Message vFlash is not enabled; the SD card could not be initialized.
Detailed
Description
none
Recommended
Response Action
Enable vFlash and try again.
Category Configuration (VFL = vFlash Event)
Severity Severity 1 (Critical)
No alerts are applicable for this message
VFL0711
Message SD card is write-protected and could not be initialized.
Detailed
Description
An error occurred while initializing the SD card because the SD card write-
protection feature is enabled.
Recommended
Response Action
Move the SD card write-protection tab to the disabled position and try again.
Category Configuration (VFL = vFlash Event)
Severity Severity 1 (Critical)
No alerts are applicable for this message
VFL0712
Message One or more partitions are busy with another operation; the SD card could not be
initialized.
Detailed
Description
none
Recommended
Response Action
Retry the task after a few minutes
Category Configuration (VFL = vFlash Event)
Severity Severity 1 (Critical)
No alerts are applicable for this message
VFL0713
Message One or more partitions are currently attached; the SD card could not be initialized.
2231