Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔* ✔*
BAT1004
Message The battery on arg1 learn cycle has timed out.
Arguments arg1 = controller name
Detailed
Description
The controller battery must be fully charged before the learn cycle can begin. The
battery may be unable to maintain a full charge causing the learn cycle to timeout.
In addition, the battery must be able to maintain cached data for a specified period
of time in the event of a power loss. For example, some batteries maintain cached
data for 24 hours. If the battery is unable to maintain cached data for the required
period of time, then the Learn cycle will timeout.
Recommended
Response Action
Replace the battery pack. The battery is unable to maintain a full charge.
Category Storage (BAT = Battery Event)
Severity Severity 2 (Warning)
Trap/EventID 4274
OMSA Event ID 2178
OMSA Trap ID 115300
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔
CMC ✔ ✔* ✔ ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔ ✔* ✔*
BAT1005
Message The battery on arg1 learn cycle has been postponed.
Arguments arg1 = Controller name
Detailed
Description
This alert is provided for informational purposes.
219