Reference Guide

USR102
Message Invalid parameter value for arg1 .
Arguments arg1 = parameter name
Detailed
Description
The value provided for the specified parameter is invalid.
Recommended
Response Action
To provide the correct value for the specified parameter, see Lifecycle Controller-
Remote Services documentation.
Category Configuration (USR = User Tracking)
Severity Severity 2 (Warning)
No alerts are applicable for this message
USR103
Message Missing parameters arg1 .
Arguments arg1 = parameter names
Detailed
Description
One or more required parameters needed for the operation are missing.
Recommended
Response Action
Refer to the Lifecycle Controller Remote Services documentation and provide the
required parameters.
Category Configuration (USR = User Tracking)
Severity Severity 2 (Warning)
No alerts are applicable for this message
USR104
Message Unable to perform the operation due to an unknown error in iDRAC.
Detailed
Description
The operation did not complete successfully because of an unknown error in
iDRAC.
Recommended
Response Action
Retry the operation. If the issue persists, reset the iDRAC.
Category Configuration (USR = User Tracking)
Severity Severity 2 (Warning)
No alerts are applicable for this message
2146