Reference Guide

UEFI0273
Message Unable to perform iSCSI boot on connection arg1 because the iSCSI target
configuration data obtained from DHCPv4 server is invalid.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the iSCSI target configuration data obtained from DHCPv4 server is invalid.
Recommended
Response Action
Do one of the following: 1) Reconfigure the DHCPv4 server root path option, and
note that server name must be specified. 2) Go to System Setup > Network Settings
> iSCSI Device Settings > Connection Settings page, disable Target Info via DHCP
and configure the parameters manually. Retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0274
Message Unable to perform iSCSI boot on connection arg1 because the iSCSI login
operation did not complete successfully.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the iSCSI login operation did not complete successfully.
Recommended
Response Action
Do the following: 1) Go to System Setup > Network Settings > iSCSI Device Settings
> Connection Settings page, make sure the target name is correct. 2) On the iSCSI
target system, make sure the initiator name is added into the target identifiers. 3)
Compare the authentication settings in the iSCSI initiator setup page to that of the
iSCSI target system and make sure the settings match. 4) Retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0275
Message Unable to perform iSCSI boot on connection arg1 because the TCP connection
timed out when connecting to the iSCSI target.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the TCP connection timed out when connecting to the iSCSI target.
2124