Reference Guide

Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the network connection to DHCPv4 server is not established.
Recommended
Response Action
Check the network cable connection of the initiator or the DHCPv4 server and
retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0271
Message Unable to perform iSCSI boot on connection arg1 because the network connection
to DHCPv6 server is not established.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the network connection to DHCPv6 server is not established.
Recommended
Response Action
Check the network cable connection of the initiator or the DHCPv6 server and
retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0272
Message Unable to perform iSCSI boot on connection arg1 because the BIOS cannot obtain
the initiator information from DHCPv4 server.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the BIOS cannot obtain the initiator information from DHCPv4 server.
Recommended
Response Action
Do one of the following: 1) Check the configuration of DHCPv4 server. 2) Go to
System Setup > Network Settings > iSCSI Device Settings > Connection Settings
page, disable DHCP and configure the initiator information manually. Retry the
operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
2123