Reference Guide

Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0268
Message Unable to perform iSCSI boot on connection arg1 because the iSCSI target name is
invalid.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the iSCSI target name is invalid.
Recommended
Response Action
Go to System Setup > Network Settings > iSCSI Device Settings > Connection
Settings page, make sure the iSCSI Target Name in the iSCSI setup page is correct,
and retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0269
Message Unable to perform iSCSI boot on connection arg1 because the iSCSI target IP
address is invalid.
Arguments arg1 = number
Detailed
Description
Unable to perform iSCSI boot on the connection identified in the message because
the iSCSI target IP address is invalid.
Recommended
Response Action
Go to System Setup > Network Settings > iSCSI Device Settings > Connection
Settings page, do the following: 1) Make sure the Target IP Address is set
corresponding to the mode enabled (IPv4/IPv6). 2) Make sure there is no
typographical error in the Target IP Address field. 3) Retry the operation.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
UEFI0270
Message Unable to perform iSCSI boot on connection arg1 because the network connection
to DHCPv4 server is not established.
Arguments arg1 = number
2122