Reference Guide

UEFI0164
Message Unable to enable the Advanced ECC memory operating mode because of
mismatches in the DIMM channel configurations on memory slots: arg1 .
Arguments arg1 = slot numbers
Detailed
Description
The Advanced ECC memory operating mode cannot be enabled because of
mismatches in the DIMM channel configurations.
Recommended
Response Action
Make sure identical memory modules in corresponding slots of channel pairs are
populated. For more information, see the platform Owners Manual.
Category Configuration (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔
CMC
UEFI0165
Message Unable to configure memory interleaving on DIMM modules on memory slots:
arg1 .
Arguments arg1 = slot numbers
Detailed
Description
Memory could not be interleaved because the number of allowable System
Address Decode (SAD) rules exceeded during memory initialization.
Recommended
Response Action
Check the DIMM population and hardware configuration to make sure interleaving
can be supported. For more information, see the platform Owners Manual.
Category Configuration (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
2067