Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0049
Message Unable to enable the Non-maskable Interrupt (NMI) button because either the NMI
button is stuck or iDRAC firmware is not updated.
Detailed
Description
The NMI button cannot be enabled because either the NMI button is stuck or
iDRAC firmware is not updated.
Recommended
Response Action
Correct the NMI button if stuck or update iDRAC firmware on the system.
Category System Health (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0050
Message The process of collecting Brand information is started.
Detailed
Description
The rebranding process is started.
Recommended
Response Action
No response action is required.
Category Work Notes (UEFI = UEFI Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
2005