Reference Guide

Recommended
Response Action
From System Setup, enable VT, and then enable TXT. If the issue persists, update
the system BIOS firmware.
Category System Health (UEFI = UEFI Event)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0042
Message Unable to enable the TXT feature because Trusted Platform Module (TPM)
configuration is invalid.
Detailed
Description
Unable to enable the TXT feature because Trusted Platform Module (TPM)
configuration is invalid.
Recommended
Response Action
Go to System Setup > System Security page, select the "On with pre-boot
measurement" option for TPM Security, and click the "Activate" option under TPM
command. Restart the system, go to System Setup > System Security page, and
then enable TXT.
Category Configuration (UEFI = UEFI Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
UEFI0043
Message Unable to enable the TXT feature because the processor does not support TXT.
2001