Reference Guide

retry the operation. 4) Make sure the OS is supported by the OS Collector
application. 5) Reinstall the latest OS Collector on the iDRAC, and then retry the
operation. 6) For more information about the collection of OS and application data,
see the iDRAC8 Users Guide.
Category System Health (SYS = System Info)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SYS167
Message TTY Log data export did not complete within the allocated time.
Detailed
Description
The TTY Log data export did not complete within the allocated time. Currently the
maximum allocated time is 20 minutes.
Recommended
Response Action
Reset the iDRAC and retry the operation.
Category System Health (SYS = System Info)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SYS168
Message Unable to complete the System Erase job because another operation is in progress.
Detailed
Description
The requested System Erase job cannot complete because there was another job
or System Services task already in progress.
Recommended
Response Action
Wait for the job or System Services task in progress to complete before initiating a
System Erase job.
Category Configuration (SYS = System Info)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SYS169
Message The iDRAC Service Module installed on the operating system is not up to date and
does not support the Technical Support Report feature.
Detailed
Description
The iDRAC Service Module installed on the operating system is not up to date and
does not support the Technical Support Report.
Recommended
Response Action
Make sure the operating system (OS) is a supported OS for the Technical Support
Report feature and the latest iDRAC Service Module software is installed on the OS.
Category System Health (SYS = System Info)
1926