Reference Guide

Detailed
Description
The System Erase operation attempted to access Lifecycle Controller internal
storage that is already being accessed by another function. Exclusive access to the
internal storage is required for the System Erase operation. The System Erase
operation attempts Lifecycle Controller internal storage access for 10 minutes.
After the timeout the current job completes with an unsuccessful status.
Recommended
Response Action
Check the server and make sure that it is not in BIOS POST startup processing or
stopped in the POST phase of startup. The server can also be stopped during POST
because the <F2> is pressed or Option ROM setup utilities are being used. After the
BIOS startup has completed, retry the operation.
Category Configuration (SYS = System Info)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
SYS165
Message One or more Tech Support Report data collection options selected did not
complete successfully.
Detailed
Description
One or more Tech Support Report data collection options selected did not
complete successfully.
Recommended
Response Action
Look at the Lifecycle Log for exception messages and resolve the issues described.
Category System Health (SYS = System Info)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SYS166
Message The collection of OS and Application Data did not start within the allocated time.
Detailed
Description
The collection of OS and Application Data did not start within the allocated time.
Recommended
Response Action
Do one of the following: 1) Retry the operation. 2) Make sure the OS does not have
any firewall setting to block USB device enumeration, and then retry the operation.
3) Make sure the OS is not configured to attach USB devices as read-only, and then
1925