Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
SYS118
Message The input power supply is not available.
Detailed
Description
The input power supply is not available because of one of the following reasons: 1)
The power cable may not be connected properly or disconnected. 2) There is an
input power failure.
Recommended
Response Action
Do of the following to resolve the issue: 1) Reconnect the power cord to the power
supply unit. 2) Make sure that the input power supply is restored.
Category System Health (SYS = System Info)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
SYS119
Message Unable to expose the OS Collector to the server OS.
Detailed
Description
The OS collector cannot be exposed to the host server because of communication
issues between the iDRAC and server OS.
Recommended
Response Action
Do the following: 1) Retry the operation. 2) If the issue persists, restart the iDRAC
and server OS.
Category System Health (SYS = System Info)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1901