Reference Guide

Detailed
Description
The input is missing a required dependency necessary for the operation.
Recommended
Response Action
Provide the required dependency and retry. For more information, see Lifecycle
Controller Remote Services documentation.
Category Configuration (SYS = System Info)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SYS020
Message Invalid required Attribute value.
Detailed
Description
The value provided for the required attribute is invalid.
Recommended
Response Action
The value specified is not valid. Refer to the Lifecycle Controller Remote Services
documentation for more information.
Category Configuration (SYS = System Info)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SYS021
Message Unable to set the value for arg1
Arguments arg1 = attribute name
Detailed
Description
The operation did not complete successfully because of incorrect parameters or
internal firmware issues.
Recommended
Response Action
Retry the operation. If the issue persists, do one of the following: 1) verify the value
being set is correct, 2) reset the iDRAC.
Category Configuration (SYS = System Info)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SYS022
Message Resource allocation failure.
Detailed
Description
The operation could not complete because of an internal resource allocation issue
with the firmware.
Recommended
Response Action
Reset the iDRAC and retry the operation.
1856