Reference Guide

Recommended
Response Action
Make sure that the CMC firmware image file is available at the location specified in
the operation, and then retry the operation.
Category Updates (SWU = Software Change)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
SWU8549
Message Unable to update the firmware of Standby CMC and Active CMC. The checksum
process was not successful.
Detailed
Description
The firmware update process of Active CMC and Standby CMC was not successful,
because of a firmware image checksum error.
Recommended
Response Action
Reacquire the Image file from the source location, and then retry the operation.
Category Updates (SWU = Software Change)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
SWU8550
Message Unable to update the firmware of Standby CMC and Active CMC.
Detailed
Description
The firmware update process of Active CMC and Standby CMC was not successful.
1842