Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
SWC8606
Message Quick Deploy Profile: Timeout exceeded while waiting for remote services ready
on Server arg1 .
Arguments arg1 = server number
Detailed
Description
The server identified in the message never reported that remote services were
ready.
Recommended
Response Action
Make sure that the iDRAC on the server identified in the message is operating
properly and that Lifecycle Controller is enabled, then retry the operation. If the
issue persists, perform a virtual reseat of the server and retry the operation. The
server can be virtually reseated by using the CMC Web UI interface and selecting
Chassis Overview > Troubleshooting > Reset Components and then select Virtual
Reseat from the drop down operation for the server identified in the message.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
SWC8607
Message Quick Deploy Profile: Starting to apply profile arg1 to server arg2 .
Arguments arg1 = profile name, arg2 = server number
Detailed
Description
The Quick Deploy of Profile process has started for the server identified in the
message.
Recommended
Response Action
No response action is required
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
1807