Reference Guide

SWC8604
Message Quick Deploy Profile: Server arg1 does not support configuration using profiles.
Arguments arg1 = server number
Detailed
Description
The target server identified in the message does not support server configuration
using profiles.
Recommended
Response Action
No response action is required.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
SWC8605
Message Quick Deploy Profile: Server arg1 generation information is not recognized.
Arguments arg1 = server number
Detailed
Description
Information about the server identified in the message is not recognized.
Recommended
Response Action
Restart the Chassis Management Controller (CMC) and retry the operation. The
CMC can be restarted by using the Web UI interface and selecting Chassis
Overview > Troubleshooting > Reset Components and then select the Reset/
Failover CMC button. If the issue persists, contact your service provider.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1806