Reference Guide

Recommended
Response Action
Retry the operation. If the issue persists, make sure any other operations have
completed and then retry the operation.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
SWC8603
Message Unable to apply profile to server arg1 using Quick Deploy feature, because the
CSIOR feature on Server arg2 is disabled.
Arguments arg1 = slot number, arg2 = slot number
Detailed
Description
The selected profile cannot be applied to the server identified in the message,
because the Collect System Inventory On Restart (CSIOR) feature on the server is
disabled.
Recommended
Response Action
Make sure that CSIOR on the server identified in the messages is enabled and retry
the operation. For 11th generation servers, to enable CSIOR, restart the server, and
select the Ctrl-E setup. Select System Services, and enable CSIOR. For 12th
generation servers, to enable CSIOR using Lifecycle Controller GUI, restart the
server, click <F2> when the companys logo is displayed. On the iDRAC Settings
page, click Lifecycle Controller, and enable CSIOR.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
1805