Reference Guide

Detailed
Description
Chassis Management Controller unable to update the IDRAC root user username
as root. This can happen if the communication to the iDRAC from CMC is non-
functional or if the username supplied is not valid.
Recommended
Response Action
Make sure the user name is valid. If communication with iDRAC is not successful,
reset the iDRAC. Retry the operation after a few minutes.
Category Audit (SWC = Software Config)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
SWC8528
Message Chassis Management Controller is unable to update the iDRAC root password.
Detailed
Description
The Chassis Management Controller is unable to update the IDRAC "root" user
password. This can happen if the communication to the iDRAC from CMC is non-
functional or if the password entered is not valid.
Recommended
Response Action
Make sure the password is valid. If communications with the iDRAC is not
functioning, reset the iDRAC and retry the operation after a few minutes. Run the
RACADM command "racadm ping server-<slot number> " to check the
communications. If the communications are not functional, restart the iDRAC by
performing a Virtual Reseat of the server using the RACADM command "racadm
racreset -m server-<slot id>".
Category Audit (SWC = Software Config)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
1795