Reference Guide

LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔* ✔*
SWC4010
Message arg1 arg2 in Server- arg3 requires a version of Chassis Management Controller
(CMC) firmware 5.0 or later for using the NParEP (ARI mode) functions.
Arguments arg1 = network device name, arg2 = network device location, arg3 = server
location
Detailed
Description
The current CMC firmware does not support the ARI Mode advanced features
available in the network device on the server identified in the message.
Recommended
Response Action
Update the CMC firmware to the latest version and to enable access to the
advanced features available in the network device.
Category System Health (SWC = Software Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SWC4011
Message A firmware or software incompatibility is automatically corrected between the arg1
arg2 in Server- arg3 and the Chassis Management Controller (CMC).
Arguments arg1 = network device name, arg2 = network device location, arg3 = server
location
Detailed
Description
A firmware or software incompatibility was automatically corrected between the
network device in the Server identified in the message and the Chassis
Management Controller (CMC).
Recommended
Response Action
No response action is required.
Category System Health (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC4012
Message A firmware or software incompatibility is detected between arg1 arg2 and arg3
arg4 .
Arguments arg1 = first component name, arg2 = first component location, arg3 = second
component name, arg4 = second component location
1775