Reference Guide

Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0702
Message Power capping is disabled.
Detailed
Description
Power capping is disabled and sets recommended limits for the system.
Recommended
Response Action
No response action is required.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0717
Message iDRAC Local Configuration is disabled. iDRAC Settings are accessed in read-only
mode.
Detailed
Description
For security reasons, the local configuration is disabled. Enable local configuration
from the iDRAC Web interface
Recommended
Response Action
Enable iDRAC local configuration from iDRAC Web interface.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SWC0722
Message Error occurred while resetting to defaults. The reset command was not accepted.
Detailed
Description
iDRAC is processing a previous reset to default command.
Recommended
Response Action
Retry after a few minutes.
Category Configuration (SWC = Software Config)
Severity Severity 1 (Critical)
No alerts are applicable for this message
1758