Reference Guide

SWC0262
Message Unable to perform operation. Please make sure RAC controller and appropriate
IPMI drivers are installed.
Detailed
Description
The IPMI drivers or the RAC controller may not be installed.
Recommended
Response Action
Check if the required modules are installed.
Category Configuration (SWC = Software Config)
Severity Severity 1 (Critical)
No alerts are applicable for this message
SWC0263
Message Specified path is too long.
Detailed
Description
The length of path to the firmware image is longer than the specified value.
Recommended
Response Action
Enter a shorter path to the firmware image file.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SWC0264
Message Resource currently in use by another process. Please retry again later.
Detailed
Description
The resources required for the execution are in use by another process
Recommended
Response Action
Wait for the process to release the resources and try again.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0265
Message This option is not supported on this type of DRAC.
1738