Reference Guide

SWC0239
Message The requested object is not allowed to be configured if IPv6 AutoConfig is enabled.
Detailed
Description
The requested object is auto-assigned if IPv6 AutoConfig is enabled, and hence
cannot be configured.
Recommended
Response Action
Disable IPv6 AutoConfig and re-try the command.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0240
Message The IPv6 DNS Server IP address is not allowed to be configured if IPv6 DNS Server
DHCP (cfgIPv6DNSServersFromDHCP6) is enabled
Detailed
Description
The requested object is auto-assigned if DNS Server DHCP is enabled, and hence
cannot be configured.
Recommended
Response Action
Disable DNS Server DHCP and re-try the command.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0241
Message Power Cap Enable not set. Unable to modify this property
Detailed
Description
To modify this property, set the Power Cap Enable option.
Recommended
Response Action
Set the Power Cap Enable object and modify the required property.
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0242
Message A required license is missing or expired. Obtain an appropriate license and try again,
or contact your service provider for additional details.
1731