Reference Guide

SWC0107
Message More than one option is not allowed with this command.
Detailed
Description
The command takes in only one option which is the Session ID.
Recommended
Response Action
Enter the command only with one option i.e. the Session ID
Category Configuration (SWC = Software Config)
Severity Severity 3 (Informational)
No alerts are applicable for this message
SWC0108
Message The service tag is not currently populated.
Detailed
Description
The Service Tag string is empty.
Recommended
Response Action
No response action is required.
Category Configuration (SWC = Software Config)
Severity Severity 2 (Warning)
No alerts are applicable for this message
SWC0109
Message No process information is currently available.
Detailed
Description
There is no RAC diagnostic information available.
Recommended
Response Action
No response action is required.
Category Configuration (SWC = Software Config)
Severity Severity 1 (Critical)
No alerts are applicable for this message
SWC0110
Message No build information is currently available.
1703