Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
SWC0018
Message Unable to apply the boot mode settings for BIOS.
Detailed
Description
The BIOS boot mode settings could not be applied due to an internal error.
Recommended
Response Action
Exit the OS Deployment wizard and retry the operation. If the problem persists, exit
the Lifecycle Controller and perform an AC power cycle.
Category Configuration (SWC = Software Config)
Severity Severity 1 (Critical)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
SWC0019
Message The Test Network Connection operation completed with errors.
Detailed
Description
The Test Network Connection ping test timed-out. The network cable is
disconnected or the network is not configured correctly.
Recommended
Response Action
Check the network cable connection and network configuration settings, then
retry the operation. If the problem persists, reconfigure the network settings and
retry the operation.
Category Configuration (SWC = Software Config)
Severity Severity 1 (Critical)
1672