Reference Guide

Severity Severity 2 (Warning)
No alerts are applicable for this message
STOR306
Message Unable to change controller mode while security key is assigned to the controller.
Detailed
Description
Controller mode cannot be changed as the controller currently has the security
key assigned.
Recommended
Response Action
Delete the security key and retry the operation.
Category Configuration (STOR = Storage)
Severity Severity 2 (Warning)
No alerts are applicable for this message
STOR307
Message Unable to perform the configuration operation because the export log operation is
currently in progress.
Detailed
Description
Unable to perform the configuration operation because the export log operation is
currently in progress.
Recommended
Response Action
Wait until the current export operation is complete, and then try the configuration
operation again.
Category Storage (STOR = Storage)
Severity Severity 2 (Warning)
No alerts are applicable for this message
STOR308
Message Controller is in HBA mode, RaidAction CreateAuto value is not supported.
Detailed
Description
The Controller is in HBA mode, RaidAction CreateAuto value is not supported.
Recommended
Response Action
In order to perform a RAID configuration operation, change the controller mode to
RAID and retry the operation. For switching to RAID mode using the F2 System
Setup utility, go to Device Settings > "RAID Controller "> Controller Management >
Advanced Controller Management > Switch to RAID mode.
Category Storage (STOR = Storage)
Severity Severity 2 (Warning)
No alerts are applicable for this message
1617