Reference Guide

STOR072
Message iDRAC Service Module (ISM) is either not present or not running on the server OS.
Detailed
Description
The configuration operation could not be performed because it requires iDRAC
Service Module (ISM) service to be present and running in the server Operating
System.
Recommended
Response Action
Make sure the iDRAC Service Module (ISM) service is running on the server
Operating System and then retry the operation. Refer to the iDRAC User Guide for
installing and starting ISM.
Category Configuration (STOR = Storage)
Severity Severity 2 (Warning)
No alerts are applicable for this message
STOR073
Message The iDRAC Service Module version present on the server OS does not support the
requested PCIe SSD (NVMe) device operation.
Detailed
Description
The iDRAC Service Module version present on the server OS does not support the
requested PCIe SSD (NVMe) device operation.
Recommended
Response Action
Update the Dell iDRAC Service Module (ISM) to the version that supports the
requested operation on the PCIe SSD (NVMe) device.
Category Configuration (STOR = Storage)
Severity Severity 2 (Warning)
No alerts are applicable for this message
STOR074
Message The requested RAID configuration operation is not allowed because the controller
is currently in HBA mode.
Detailed
Description
The requested RAID configuration operation will not be allowed because the RAID
controller is currently in HBA mode.
Recommended
Response Action
In order to perform a RAID configuration operation, change the controller mode to
RAID and retry the operation. For switching to RAID mode using the F2 System
Setup utility, go to Device Settings > "RAID Controller "> Controller Management >
Advanced Controller Management > Switch to RAID mode.
Category Configuration (STOR = Storage)
Severity Severity 2 (Warning)
No alerts are applicable for this message
1599