Reference Guide

STOR069
Message Unable to run the arg1 method, because the number of elements entered for
VDPropNameArry and VDPropValueArray is unequal.
Arguments arg1 = method name
Detailed
Description
The method name identified in the message could not be successfully completed,
because the number of elements entered for VDPropNameArry and
VDPropValueArray is not equal.
Recommended
Response Action
Enter equal number of elements (pair value), and then retry the operation.
Category Configuration (STOR = Storage)
Severity Severity 2 (Warning)
No alerts are applicable for this message
STOR070
Message Unable to run the WS-MAN method arg1 , because an invalid parameter arg2 is
entered.
Arguments arg1 = method name, arg2 = parameter name
Detailed
Description
The method name identified in the message could not be successfully completed,
because the number of elements entered for VDPropNameArry and
VDPropValueArray is not equal.
Recommended
Response Action
Enter a valid parameter, and then retry the operation. For more information about a
valid parameter, refer to the SimpleRAIDProfile document available at Dell Tech
Center http://en.community.dell.com/techcenter/extras/m/white_papers/
20263535.aspx
Category Configuration (STOR = Storage)
Severity Severity 2 (Warning)
No alerts are applicable for this message
STOR0701
Message Storage objects are unavailable in the current system configuration.
Detailed
Description
There are no RAID controllers, physical disks or virtual disks discovered by
instrumentation that can be configured.
Recommended
Response Action
Storage objects are unavailable in the current system configuration. Make sure that
the storage devices are installed in the system, and then retry the operation after
the Collect System Inventory On Restart (CSIOR) feature has updated the system
inventory. If the issue persists, contact your service provider.
1597