Reference Guide

Detailed
Description
The requested operation cannot be completed because the specified controller is
not found.
Recommended
Response Action
Provide a valid controller FQDD (Fully Qualified Device Descriptor) and retry the
operation.
Category Configuration (STOR = Storage)
Severity Severity 2 (Warning)
No alerts are applicable for this message
STOR031
Message Lifecycle Controller is not enabled.
Detailed
Description
For 11G systems: System Services must be enabled to perform the requested
operation. System Services has been disabled through the iDRAC configuration
utility accessed by pressing CTRL+E on boot up or through a remote operation. For
12G systems: Lifecycle Controller must be enabled to perform the requested
operation. Lifecycle Controller has been disabled by pressing F2 Setup, selecting
iDRAC Configuration, and selecting Lifecycle Controller Settings on boot up or
through a remote operation.
Recommended
Response Action
For 11G systems: Use the iDRAC configuration utility to enable the System Services
by pressing on the CTRL+E option on boot up at the targeted system. For 12G
systems: Use F2 Setup, select iDRAC Configuration, and select Lifecycle Controller
Settings, to enable the Lifecycle Controller on boot up of the targeted system.
Category Configuration (STOR = Storage)
Severity Severity 3 (Informational)
No alerts are applicable for this message
STOR032
Message Lifecycle Controller is currently in use.
Detailed
Description
Lifecycle Controller is unable to gain access to internal storage because it is in use
by another application or operation.
Recommended
Response Action
Wait for current Lifecycle Controller operation to complete. Verify that the system
is 1) Not currently in Lifecycle Controller Configuration utility 2) Not waiting for
user intervention at F1/F2 POST error 3) Not in any of the device or controller
Option ROMs and retry the operation.
Category Configuration (STOR = Storage)
Severity Severity 2 (Warning)
No alerts are applicable for this message
1577