Reference Guide

Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔ ✔
CMC ✔ ✔* ✔*
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC ✔* ✔*
SEC0613
Message The default username and password is changed.
Detailed
Description
The default username and password is changed.
Recommended
Response Action
No response action is required.
Category System Health (SEC = Security Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔* ✔
CMC
SEC0700
Message Warning: Default username and password are currently in use. It is strongly
recommended to change the default password before configuring the property.
Else, it causes a severe security risk for iDRAC.
Detailed
Description
If the property name is configured without changing the default password, iDRAC
may be accessible on the Internet. This causes a severe security risk for iDRAC.
Recommended
Response Action
To change the password, run the following racadm command: racadm set
iDRAC.Users.<index>.Password <new password string>. Alternatively, to avoid this
warning message, run the following racadm command: racadm set
iDRAC.Tuning.DefaultCredentialWarning Disable.
1522