Reference Guide

Arguments arg1 = parameter
Detailed
Description
The operation did not complete successfully because of an invalid value for the
parameter identified in the message.
Recommended
Response Action
Verify the value for the parameter identified in the message is valid and retry the
operation.
Category Updates (RED = FW Download)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RED080
Message The required parameter arg1 is not present.
Arguments arg1 = parameter
Detailed
Description
The operation did not complete successfully because the required parameters
identified in the message is not present in the method invocation.
Recommended
Response Action
Verify that all required parameters for the method are present and retry the
operation.
Category Updates (RED = FW Download)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RED081
Message The Automatic Update schedule already exists.
Detailed
Description
The requested operation was not successful because an Automatic Update
schedule already exists.
Recommended
Response Action
Delete the existing Automatic Update schedule operation before retrying the
operation.
Category Updates (RED = FW Download)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RED082
Message The requested job cannot be scheduled, because job schedule type such as
Automatic Backup or Automatic Update is not enabled.
Detailed
Description
The Automatic Update or Automatic Backup feature is disabled.
1466