Reference Guide

Detailed
Description
The necessary user access rights for performing the operation identified in the
message are not available for the username used to access the iDRAC.
Recommended
Response Action
Use a username that has the necessary access rights and retry the operation.
Category Updates (RED = FW Download)
Severity Severity 3 (Informational)
LCD Message <task type> A recurring task was not created because the required user authority is
not present.
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
RED043
Message A recurring operation of type arg1 was not created because the operation type is
disabled.
Arguments arg1 = operation type
Detailed
Description
The operation identified in the message is currently disabled.
Recommended
Response Action
Enable the operation identified in the message and retry the operation. To enable
the Automatic Server Profile Backup operation, run the following racadm
command: "racadm set lifecycleController.lcattributes.AutoBackup 1". To enable
the Automatic Update operation, run the following racadm command: "racadm set
lifecycleController.lcattributes.AutoUpdate 1".
Category Updates (RED = FW Download)
Severity Severity 3 (Informational)
LCD Message <task type> A recurring task was not created because the task type is disabled.
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔ ✔ ✔
CMC
1448