Reference Guide

RDU8513
Message CMC arg1 : firmware versions are same arg2 arg3
Arguments arg1 = slot number, arg2 = fw version, arg3 = factory revision
Detailed
Description
The firmware version of Active CMC and Standby CMC are the same.
Recommended
Response Action
No response action is required.
Category Audit (RDU = Redundancy)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC ✔* ✔*
RDU8514
Message CMC arg1 : cannot failover, firmware update is in progress.
Arguments arg1 = slot number
Detailed
Description
A failover operation has been requested, but a failover operation cannot be
completed while CMC firmware update is in progress.
Recommended
Response Action
No response action is required.
Category Audit (RDU = Redundancy)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
1418