Reference Guide

RAC942
Message Successfully initiated the import operation. This operation may take several minutes
to complete and may cause multiple system restarts while device firmware and
configuration are applied.
Detailed
Description
The system configuration profile import operation is initiated. No other operations
can be performed on the system while the system configuration server profile is
being imported from the system configuration profile.
Recommended
Response Action
Monitor the job status using "racadm jobqueue view -i <Job ID>".
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC943
Message Warning: Collect System Inventory On Restart (CSIOR) feature is disabled.
Detailed
Description
The Collect System Inventory On Restart (CSIOR) feature is currently disabled. If
the system inventory is not up-to-date, the system configuration profile that is
being copied will not have the latest inventory information.
Recommended
Response Action
To get latest inventory information, cancel the current export job, run "racadm set
LifecycleController.LCAttributes.CollectSystemInventoryOnRestart 1" to enable
CSIOR, and re-initiate the export operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
1370