Reference Guide

RAC918
Message Unable to get the inlet temperature data.
Detailed
Description
Racadm unable to obtain the inlet temperature data. This happens if there is no
data populated in the temperature tables or if the underlying instrumentation does
not return valid values.
Recommended
Response Action
Wait for the underlying instrumentation to populate the thermal tables. Retry the
operation.
Category System Health (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC919
Message Copy to remote share unsuccessful. Remote share might be write protected.
Detailed
Description
Racadm could not export the inlet temperature history file to the specified remote
share. This is because the specified share may be write- protected.
Recommended
Response Action
To export the file, change the permissions on the remote share. Else, create
another share with write permissions.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC920
Message This interface does not support the specified option.
Detailed
Description
From firmware racadm, the inlet temperature history can be exported only to a
remote file share.
Recommended
Response Action
Create a remote file share to export the inlet temperature history. Else, use remote/
local racadm to export to the file system accessible by the racadm executable.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
No alerts are applicable for this message
RAC921
Message The temperature history can be exported in XML or CSV format only.
1363