Reference Guide

RAC802
Message iDRAC time is set using Network Time Protocol.
Detailed
Description
iDRAC time has been set through Network Time Protocol (NTP).
Recommended
Response Action
No response action is required.
Category Audit (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC ✔*
CMC
RAC913
Message Unable to login to RAC using the specified address
Detailed
Description
The management system could not login to the iDRAC.
Recommended
Response Action
Verify whether the username and password given for the iDRAC are correct.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
No alerts are applicable for this message
RAC914
Message Value specified is invalid: Must be 0 (Off) or 1 (On).
Detailed
Description
The specified value is not within the valid range. To set the LED state to off, enter 0.
To set the LED state to on, enter 1.
Recommended
Response Action
Set the numeric value to 0 (Off) or 1 (On).
Category Configuration (RAC = RAC Event)
1361