Reference Guide

Detailed
Description
A USB Device inserted in the front panel USB Management port and is in use by the
server operating system. The device needs to not be in use in order to change the
port mode settings.
Recommended
Response Action
Remove and reinsert the USB device and retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1181
Message Unable to change USB Management Port mode.
Detailed
Description
USB Management Port state cannot be changed because of an unknown hardware
or firmware issue.
Recommended
Response Action
To change the Management Port mode settings do the following: If a device is
present, remove and reinsert the USB device from the front panel USB
Management port and retry the operation. If the issue persists restart the iDRAC
and retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
1356