Reference Guide

Category Configuration (RAC = RAC Event)
Severity Severity 2 (Warning)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1130
Message Unable to complete the operation. This feature is not supported on the currently-
used platform.
Detailed
Description
The requested operation could not be successfully completed because of an
unsupported version of BIOS, USC, and/or iDRAC firmware.
Recommended
Response Action
Verify whether or not a correct version of BIOS, Lifecycle Controller, and/or iDRAC
firmware is installed. For more information on the appropriate firmware version
required, refer to the RACADM Command Line Reference Guide. Also check if
there is a limitation in terms of platforms such as monolithic or modular, and then
retry the operation.
Category Configuration (RAC = RAC Event)
Severity Severity 3 (Informational)
Filter
Visibility
IPMI
Alert
SNMP
Alert
Email
Alert
Remote System
Log
WS
Eventing
iDRAC ✔
CMC
LC Log LCD OS Log Power
Off
Power
Cycle
Reset Chassis Event
Proxy
iDRAC
CMC
RAC1131
Message iDRAC was successfully reset.
Detailed
Description
The iDRAC was reset and is successfully restarted.
1333